Power Source setting "appears" incorrect

Post your questions and help other users.

Moderator: Martin

Post Reply
cunningt
Posts: 4
Joined: 13 Jan 2013 01:31

Power Source setting "appears" incorrect

Post by cunningt » 23 Jan 2013 01:56

I missed the boat reporting this minor bug for 1.13.0 and now that 1.14.0 is out, I verified that this bug still exists.

Reproducing bug:
- create new trigger: Power Source
- select radio button: Disconnected
- save this trigger
- when editing this trigger again the radio button says "Connected"
- when physically disconnecting the power source the trigger does activate properly

This simply caused me some confusion for a bit, but the trigger does work. Thank you.

User avatar
Martin
Posts: 4468
Joined: 09 Nov 2012 14:23

Re: Power Source setting "appears" incorrect

Post by Martin » 23 Jan 2013 09:08

Thanks for your report, this should be fixed in the next update.

saherr1969
Posts: 27
Joined: 01 Dec 2012 08:13

Re: Power Source setting "appears" incorrect

Post by saherr1969 » 14 Feb 2013 07:24

Has the version correcting this been released? If so, it is still not fixed, as I just imported a flow from the flow sharing forum that used it to lock the screen on or off depending on whether the power was connected .

Thanks!

User avatar
Martin
Posts: 4468
Joined: 09 Nov 2012 14:23

Re: Power Source setting "appears" incorrect

Post by Martin » 14 Feb 2013 07:49

Not yet. I will be fixed in the next update (1.15).

Post Reply